Rat-trap



Rat-trap
Tube. Duration : 4.17 Mins.
Victor M240 Electronic Rat Trap Applies 8,500 volts for killing large rats quickly
You've just settled down in bed and are twenty minutes into Letterman when you hear it: a light scratching overhead, accompanied by a squeak here and a squeal there. You assume that it's the wind making strange noises (after all, it is windy tonight!), or perhaps the house is just settling (you do live in an older home, so it would make sense...). Maybe the sounds are just the result of an overactive imagination. You hope!
Of course, you just can't get around the obvious conclusion - you have company. Whether it's a bird, a bat, a squirrel, or an entire family of mice, there's something up there. Given that you've had recurrent rodent problems, the latter option is probably the safest bet.
However, how can you be sure what type of animal you're dealing with - assuming that you even have unwelcome visitors at all? Before you can evict them, you need to know who "they" are.
Above all else, your first step is to inspect your home for signs of mice. Different problems call for different solutions; if your visitors are actually squirrels instead of mice, you'll need to develop a different strategy.
When canvassing your home, keep an eye out for these seven telltale signs:
1. Droppings and urine
Mouse droppings resemble a grain of rice; they are approximately the same size, but are black in color. Mice will not generally travel across open spaces, so you're more likely to find droppings along walls, pipes, and beams, as well as in storage areas and next to objects. "Urine pillars" are less common; they consist of mounds of grease, urine, and dirt. You can also use a blacklight to find individual urine droppings.
2. Chew marks
Look for tooth marks and wood shavings (similar in consistency to sawdust) around doors, baseboards, and cabinets. Marks on food containers can also be a clue that you have company.
3. Grease marks
When traveling alongside pipes, beams, and walls, mice may leave greasy smear marks, as dirt and oil from their fur rubs off onto the surfaces.
4. Tracks
Footprints and tail marks on dirty, dusty, or muddy surfaces can indicate activity. If you suspect that mice have taken up residence in an otherwise impeccably clean area of your house, lay down a sprinkling of talc to catch them in the act.
5. Nests
Mice construct nests of shredded paper and similar debris; check attics, basements, garages, storage areas, closets, and other dark, enclosed places for nests or "stolen" materials.
6. Sounds
You're more likely to hear squeaks and squawks at night, when the house is quiet and your guests are active.
7. Sightings
It's not uncommon to see mice during the day; although they are largely nocturnal, they do move about in daylight.
Now that you're certain that you're dealing with mice, it's time to start strategizing. Your plan of attack will actually come in three phases: first you need to clean up the messes you found; next, you must trap and release your unwelcome visitors; and finally, you'll mouse-proof your house so they can't get back in (and wouldn't want to, even if they could!). Good luck!
If you love survival adventures, learning the skill of how to make a trap proves to be useful. But jokers and pranksters find this kind of skill as something they need to know by heart for good laughs. It is highly important, however, for traps used in pranks that the one setting it up does not intend to hurt.
In the following paragraphs, we will try to teach you how to make a trap. Make sure, though, that you do not intend to hurt people seriously. If it is just for fun, have a go by all means!
How to make a trap is quite a simple task to accomplish. There are no complex instructions or constructions involved. Well, technically, the simplicity of how to make a trap relies on what kind you are about to create. Here, we are talking about just booby traps. The kind that is very useful in having a good laugh out of someone.
Step #1: A how to make a trap project starts by gathering all the necessary materials. Get a string, a small piece of soft wood, a spoon, and some icky material. Jellybeans, gummy bears, washable paint, jams... you could use just about anything really! Your kind of fun spells what you want to fall onto the person you are setting the trap for.
Step #2: Choose the place to set up the booby trap. It has to be a corridor where you can lure your victim to come across. Make sure, however, that anyone who's out to scold you if they know you are up to something naughty would not find the prank all set up.
Step #3: Tape the string from one wall to the other. Its presence has to be subdued. Otherwise, your victim would avoid it.
Step #4: Place the piece of small wood in one side of the wall. It has to be supported by the string. The idea is that, if the string splits, the wood collapses.
Step #5: Set up the spoon with icky materials onto the very spot where the wood will collapse so that when it is hit, its contents will fly up. The idea is to hit the victim with the contents of the spoon while you are having a good laugh over it.
After setting up the booby trap, make sure that you try it first. This is an important step to check if the prank actually works. Again, remember that this how to make a trap project should only be meant to trick someone. You and your victim must have a good laugh over it afterwards to be truly enjoyable.
One of the nicest cars that can be built by anyone is the mouse trap car. This kind of car uses a spring to harness the power and move the wheels. In order to construct the mouse trap car, you need 2 metal rods, 4 eyehole screws, mouse trap, plywood, washer, rubber bands and string.
Making a mouse trap car:
1. On the mouse trap you can locate the wires. Make sure to keep the trap wide opened.
2. Get the wires out of the trap using the pliers. Take away the bait holder as you will not require it. Hold the parts you removed using the staples.
3. Drill a nice and small hole on one trap, at the end. It is good to set the holes 8mm away from the edges.
4. you can now put together the axle and wheel. Use the compass to create 4 circles of 75mm onto the plywood. Smoothen the edges using a file.
5. cut the metal rods and make sure they are the same length.
6. cut through one rod and fit the wires on to the groove. After that you have to glue the wire to the axle's slot.
7. The final step is to create the engine of the trap car. Some people say this is the most complicated thing to do but it is not like that at all if you pay attention to all the indications. First take the string and then firmly tie it onto the middle of the trap jaws. Make sure to tie a strong loop in the trap's end. After doing that you should see that the loop is at the rear axle. Nicely take 2 rubber bands and then glue them all around the rear wheels. In this way you will provide the traction